[table]Size,Length,Type,Quantity
M3,4,Grub Screw,1
M3,8,Button Head,3
M3,8,Cap Head,12
M3,12,Cap Head,10
M3,16,Button Head,4
M3,16,Cap Head,54
M3,25,Cap Head,15
M3,25,Hex Head,2
M4,35,Button Head,1
[/table]
Category Archives: 3DPrinting
3D Create & Print Issue 47 – Hood limit switch
Just a little tip for anyone else that had trouble with the screw provided with this issue as they seem to be made out of the softest metal in the world.
I drilled out the holes on the limit switch to 3mm which is easy to do as they are 2.5mm already.
This then allowed the use of some 3mm machine screws I had on hand with 3mm nuts, luckily the holes in the frame are already big enough so no further modification needed.